Real Time PreProcessor
If you are connecting a machine to MissionOS and wish it to show data real time you will need a real time pre-processor. MISSIONCONTROL securely manages the connections between your machine and the cloud without exposing them to external intrusion. With MISSION CONTROL our maintenance team can track communications and ensure data flows and alert your team if there are interruptions.
EDGE server
On structural health and other dynamic stressed systems very high frequency data may be needed ie from 0.005Hz (<5min interval) up to 1000 Hz (0.001 sec interval). For this a real time preprocessor is needed. MISSIONEDGE processor will:
- Read the data stream for your logger in real time
- Create a channel to real time screens and a real time historian with data updates at ><3 sec latency
- Create time series summary records at a frequency you specify eg every 10 mins and send this record and an associated compressed data file of the detail to MissionOS Generic Data Loader (GDL). The time series summary data will provide max, min, avg, std and other summary statistics for each field captured.
- MISSIONEDGE can also send instantaneous alarms on simple parameters direct from site.
- Fast fourier transforms can be conducted as part of the summarising process to send velocity values within specific frequency bins.
- MISSIONEDGE is configurable from MissionOS and can be linked to other parameters being measured eg wind speed.
Real Time Machine Setup
Each machine need connection to map the data logged feeds to the MIMIC screens and the other parts of MissionOS where machine data interacts with other data sources.
Real Time MIMIC Screen
We can provide pre-prepared MIMIC screens as part of our machine turnkey systems but bespoke screens can also be prepared as per requirements.
CCTV
Any CCTV from simple IP Cameras to streams within third party systems can be connected to MissionOS and displayed directly within the software without additional login. Feeds can also be recorded to web for a specific period eg previous 48 hrs as required without the need for video recoding hardware.
Satellite INSAR
INSAR data streams can be added to MissionOS and uploaded from time to time. These are large data sources and the reading and update frequency must be considered.
Terrestrial Radar Real Time
High frequency real time radar data can be loaded to MissionOS. The data is handled using raster methods. Preprocessing can be applied to mine specific numeric result form these data for entry into the MissionOS Generic Data Loader.
LIDAR and other Point Clouds
INSAR data streams can be added to MissionOS and uploaded from time to time. These are large data sources and the reading and update frequency must be considered. MissionOS will:
- Load the original point clouds
- Downsample the point clouds to suitable resolutions for web viewing and for internal calculations.
- Undertake comparisons against other point clouds and again design shapes.
- Report the results to MissionOS into pre-prepared data models
